We've just launched our map. Add yourself by clicking here!

close

Mass Production Molding with Extrusion

This topic contains 0 replies, has 1 voice, and was last updated by  Butte Metz 2 months ago.

1
Butte Metz btmetz

Mass Production Molding with Extrusion

08/08/2020 at 03:08

 

Full description in the comments.

 

Basically I extrude into a heated pot, then transfer the blob of hot plastic to the air powered compression molder.

 

Mold is liquid cooled.

 

average 2 min per part.  1.5 min to cool, 30 seconds to remove.

 

 

0 replies
1 subscribers
0 saved
1 likes

You must be logged in to reply to this topic.

  • Folks that were just here

    Profile picture of Dave Hakkens
    Profile picture of Ilan
    Profile picture of PlasticHub
    Profile picture of Axel Becchi
    Profile picture of Roger
    Profile picture of Jamie Mudge
    Profile picture of Ben
    Profile picture of anke leeman
    Profile picture of benjamin50
    Profile picture of Mark Riem
    Profile picture of Aleardo
    Profile picture of Marcus Rosenthal
    Profile picture of allen guo
    Profile picture of YONLONFOUN
    Profile picture of henry
    Profile picture of andre figueiredo
    Profile picture of Jacob
    Profile picture of jonathan grupe
  • Recent Replies

  • Support our projects on Patreon so we can keep developing 💪